FEATURES OF MINIFOR LABORATORY FERMENTOR AND BIOREACTOR

MINIFOR fermentor and bioreactor was developed with innovations breaking down the stereotypes based on the personal experiences in the laboratory. The innovations introduced are done periodically with reference to the difficulties faced while working with the traditional fermentor and bioreactor in the laboratory.

Peristaltic pump

RELIABLE PERISTALTIC PUMPS FOR CONTINUOUS CULTURES

Highly reliable pumps with reproducible flow rates for bioprocessing techniques The unique tubing compression technique for long tubing life and long-term stability of flow rates even with low-cost tubing Flow rates remain constant for several weeks without the risk of tubing rupture in long-term experiments like continuous cultures, chemostat, perfusion Variable speed pump for better […]

Selfcleaning sparger during fermentation

SELF-CLEANING MICROSPARGER

 Self-cleaning micro-sparger of MINIFOR which due to its elasticity releases any deposit formed on the sparger orifice and guarantees gas inflow at all times without interruption.

LAMBDA CARBOMETER unit measures %CO2 in a gas flow

OUTGAS / EXIT GAS MEASUREMENT: % CO2, % O2, % CH4

OUTGAS / EXIT GAS MEASUREMENT: % CO2, % O2, % CH4 LAMBDA Laboratory Instruments offers the following outgas/exit gas measurement units for bench-top bioreactor systems beside off total flow measurements: LAMBDA CARBOMETER measures the concentration of carbon dioxide (CO2) LAMBDA OXYMETER measures the concentration of oxygen (O2) LAMBDA METHAMETER measures the concentration of methane (CH2)

compact fermentor & bioreactor system

COMPACT FERMENTOR SYSTEM WITH SMALLEST FOOTPRINT

Smallest fermentor system footprint with control unit Comparable to the size of an A4 sheet for all working volumes (35 ml to 6 L) Extremely compact fermentor system than any other system in the market Weight of LAMBDA MINIFOR fermentor unit: only 7.5 kg Perfectly accessible from all sides The footprint of the LAMBDA MINIFOR […]

Screenshot of FNet fermentation software

FERMENTATION CONTROL SOFTWARE

LAMBDA MINIFOR fermenters and bioreactors include all the electronics for visualizing and regulating 6 parameters (temperature, pH, DO, air flow rate, agitation and one free parameter ‘X’). However, the fermenters and bioreactors can get connected to process control software (PCS) for completely automatic control, data acquisition and real-time visualization of parameters and their settings: FNet […]

LAMBDA LUMO light module for photobioreactor

LAMBDA LUMO: Light intensity control for phototrophic cultures

LAMBDA LUMO: Light control for phototrophic cultures LAMBDA LUMO light control unit together with the LAMBDA MINIFOR bioreactor is a photobioreactor for growing phototrophic cultures: Optimal light intensity achieved with LUMO light control unit LED light with high light intensity and low radiant heat emitted to the medium (no or less medium cooling) Manual or […]

LAMBDA REDOX is a ORP controller for fermenter

REDOX POTENTIAL MEASUREMENT (ORP)

ORP measurement in MINIFOR fermentor – bioreactor with redox measurement unit and combined redox, pH & temperature probe No additional connectors, cables or side ports are needed for redox implementation Redox potential measured in mV Regulation of redox potential and data saving by SIAM fermentation software Possibility to control the fermentation process at a desired […]

LAMBDA ANTIFO & DOZITO automatic antifoam system for fermentor

Automatic antifoam control system

Automatic antifoam control system World’s smallest antifoam control system with miniature foam detector LAMBDA ANTIFO and subminiaturise syringe pump LAMBDA DOZITO for fermenters No additional level sensor probe needed to place into the fermenter vessel Prevents overdosing of antifoam agent

LAMBDA MASSFLOW for gas flow control

MASSFLOW – PRECISE GAS FLOW CONTROLLER AND MEASUREMENT

MINIFOR control unit equipped with a high precision thermal massflow meter (0 – 5000 ml/min) Offers high quality regulation of dissolved oxygen (DO) by air flow rate variation in the fermentor – bioreactor Gas flow measurement is independent of pressure and temperature Precise and reproducible air flow rate with a proprietary proportional needle valve Build […]

Automatic gas mixing module LAMBDA MINI-4-GAS for bioreactors

Gas mixing module LAMBDA MINI-4-GAS

MINI-4-GAS: Automatic gas mixing module for bioreactors The automatic gas mixing module MINI-4-GAS from LAMBDA Laboratory Instruments offers to mix up to 4 gases per bioreactor according parameter values or flow rate set-points of each gas. LAMBDA MINI-4-GAS automatic gas module can be purchased as option integrated to LAMBDA MINIFOR bioreactors or as a stand-alone […]